RCA - Rub Coat Additive
Add to color-coatings at a specified ratio, (60 parts of color, 40 parts RCA) allowing for a rub-on color application that does not need subsequent clear-coat application. Great for in-home color enhancement and restoration, without the need for extensive taping off or spray equipment.
Add to color-coatings at a specified ratio, (60 parts of color, 40 parts RCA) allowing for a rub-on color application that does not need subsequent clear-coat application. Great for in-home color enhancement and restoration, without the need for extensive taping off or spray equipment.
Add to color-coatings at a specified ratio, (60 parts of color, 40 parts RCA) allowing for a rub-on color application that does not need subsequent clear-coat application. Great for in-home color enhancement and restoration, without the need for extensive taping off or spray equipment.
Description: Rub-coat additive is used to provide technicians the flexibility of converting our 2 step color-coat/top-coat system into a single step rub-on system. It toughens the color-coat, raising wear and chemical resistance, without a subsequent clear-coat application. This allows for easier in-home application, greatly reducing typical tape-off times, and over-spray concerns. The rub-on system allows for color freshen-ups, rather than more extensive, off-site refinishes, lowering cost for clients, while shortening project times and raising profitability for technicians.
Application: RCA is mixed with pre-matched colors at a ratio of 2:3 (2 parts RCA to 3 parts color). The mixture can then applied to prepared leather surfaces using a variety of application tools (foam brush, foam block, low-lint rag, etc.). Proper preparation or priming of the leather surfaces should be done prior to color application, as with any color application system.
Once applied, colors can air-dry (oxidation), or can be force-cured using a heat-gun or radiant heat source. Oxidation curing times will be dictated by ambient issues such as temperature or humidity.
As with most finish mediums, any RCA/color mixture should be well-shaken and filtered prior to application.
RCA is water-based and has a low toxicity, though proper ventilation and safety measures are recommended. RCA MSDS is available here.
For additional technical information or support, please call (800) 541-5982, or e-mail jmurray@advleather.com.
MSDS is available via this link.